ALL CATEGORY 전체메뉴보기
  • 왼쪽 게시판 상단
  • 왼쪽 공지사항 게시판
  • 왼쪽 문의 게시판
  • 왼쪽 구매후기 게시판
  • 메인화면 왼쪽 메뉴 하단
왼쪽 고객센터
왼쪽 배송조회
[80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트

[80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트

공유
정가
995,000
판매가
970,000
구매제한
최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 김포시 양촌읍 김포한강4로 315-4 2층 제이팩토리RC
상품코드
1000002774
모델명
80950
제조사
TEAM ASSOCIATED
원산지
대만
[80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보


The next evolution of the RC8B4 eBuggy is upon us. Team Associated engineers sought to lower the CG and weight and improve handling on un-groomed outdoor tracks. The heart of the buggy is the new RWB/FWB adjustable weight bias chassis design. The innovative system allows the driver to run either configuration with the motor rearward for more traction, or shift the center diff and flip the center dogbones to run motor forward for more steering.


The suspension is overhauled with new front and rear low-CG shock towers and shorter shocks, along with new 3-hole rear suspension arms that allow for softer shock and spring while still maintaining support in the fast turns. The new wide base rear hubs come in three fixed axle heights and use 3mm carbon fiber hub towers to allow several different geometry options.

Lastly, the buggy comes with 92mm universal joints, 44/13 bevel gears, and a 46T molded spur gear for the most grip and smoothest power delivery on un-groomed outdoor tracks.

Features

  • New RC8B4.1e RWB/FWB adjustable weight bias chassis design to tune rear grip vs. steering
  • New low CG and lightweight aluminum front and rear shock towers
  • New shorter 16mm front and rear shock bodies for lower CG and lighter weight
  • New 6-hole 1.4mm front and 1.5mm taper rear machined shock pistons included with emulsion shock cap seals
  • New 3-hole rear suspension arms with updated rear anti-roll bar geometry for both smooth and bumpy tracks
  • New blue aluminum front upper arm mount for added durability
  • New molded RC8B4.1 front bumper with optimized profile for bumpy transitions
  • 13-44 Ring and Pinion Bevel Gear Set
  • 92mm universal driveshafts with 17mm outdrives
  • Updated Soft Blend suspension arms for maximum durability in cold weather
  • New +1 aluminum steering block arms for sharper steering on low grip


Legacy Features

  • RC8B4e centralized drivetrain and chassis configuration optimized for shorty-style batteries only
  • Two battery trays included with adjustable stops for battery position adjustment
  • RC8B4e 25mm wide hook and loop strap per battery tray for easy battery hold-down
  • RC8B4e ESC tray with protective shield has unique position for 2x2s and 1x4s battery setups for ideal weight bias positioning
  • RC8B4e receiver box with built-in servo mounts has integrated cable routing and increased volume for fitting taller antenna-less receivers
  • Wire routing clips included for clean wiring of batteries and motor with sensor wire
  • Two-piece clamping motor mount which can shift to the forward or rearward location to support FWB or RWB.
  • Innovative new pivot ball front suspension geometry improves steering balance and provides predictable handling in all conditions
  • RC8B4 8deg. steering blocks are paired with a wider upper suspension arm pivot for increased stability and consistent steering through the entire steering throw
  • RC8B4 gearboxes are included in the latest hard material used on RC8T4: Front gearbox features a 3.5 deg. inclined pinion gear angle to straighten the center driveshaft for increased drivetrain efficiency and reduced phasing and vibration. Both gearboxes feature large bearing sizes, 6x13x5mm flanged bearing results in longer life of bearings and ring and pinion gears.
  • RC8B4 rear chassis brace has several design features and flex options: Rear brace is mounted centrally to the gearbox, and has two screw locations through the chassis to tune flex.
  • RC8B4 front upper suspension arms, now in soft blend material. Includes an optional molded "wing" insert for increased front-end downforce.
  • RC8B4 front lower suspension arms, now in soft blend material . Updated design for added durability. New angled, one-piece, anti-roll bar link is mounted in-line with the anti-roll bar with a BHCS instead of a shock pin for simplified assembly. Optional inserts mount to the top only.
  • RC8B4 rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape, and extra clearance for shock position adjustment. Two wing height options on the rear shock tower.
  • RC8B4 rear wing has more vertical fins for increased straight-line stability, a taller rear lip height for increased downforce, increased strength in various areas to reduce bending fatigue, and dimples on the backside as a template for cutout holes
  • RC8B4 steering bellcranks with top-mounted steering rack for extra clearance around gearbox assembly
  • RC8B4 aluminum steering rack designed around the updated front end geometry is lightweight and durable
  • RC8B4 steering bellcrank nuts are longer to reduce drag from the steering rack under flex
  • RC8B4 steering servo linkage features a new heavy duty threaded ball-and-steel screw joint
  • RC8B4 A and B blue aluminum suspension arm mounts are shaped to interlock with the chassis
  • RC8B4e carbon fiber front top plate centralizes the front chassis brace for balanced flex in all directions
  • RC8B4 front chassis brace is the same length as the older chassis "short" version for ideal front-end flex
  • RC8B4 front body post is recessed into the front top plate and the reversible design is easy to mount
  • RC8B4 spring cups and shock rod end design has a locking screw to keep the cups in place during a crash
  • RC8B4 steel shock standoffs
  • Large diameter, Low-Profile SHCS are used throughout the buggy to replace a traditional screw/washer system. Used on the servo mount, and rear body post
  • 96.5mm rear and 104mm front center dog bones with 3x14mm pins for increased drivetrain efficiency
  • RC8B4 two-piece rear body post features a rubber grommet to allow some flex to extend the life of the body
  • RC8B4 rod ends have improved thread engagement, slotted area for easy turnbuckle wrench access, and are made from a same durable material as our 1:10 rod ends
  • Standard wheel hex sizes include a "+0" mm front and rear
  • Standard anti-roll bar sizes include a 2.2mm front and 2.5mm rear bar
  • RC8B4 Gamma body and window mask. Includes three different style of gearbox noses: a traditional nose cone, a mid-height wing, and tall-height wing.
  • 44T ring and 13T pinion gears on front and rear differentials
  • RC8B3.2 split center diff mounts with aluminum center top plate
  • 16mm shocks equipped with white front (9.25 coil) and pink rear (12.0 coil) springs, emulsion style shock bladder, combination bleeder/emulsion caps, and blue aluminum threaded collars.
  • RC8B3.2 narrow C and D arm mounts

Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.


80950_8B41e_RearMount_IMG_3158_110930.jpg
80950_8B41e_TopDown_NB_IMG_3151_110931.jpg
80945_B4_DiffApart_IMG_9774_110931.jpg
80946_B4e_RRWingMount_IMG_9759_110932.jpg
80950_8B41e_3QLow_NB_IMG_3152_110933.jpg
80950_8B41e_ChassisCenterP_IMG_3138_110933.jpg
80950_8B41e_DriveShaft_110934.jpg
80950_8B41e_Elecs_IMG_3156_110934.jpg
80950_8B41e_Elecs2_IMG_3157_110935.jpg
80950_8B41e_HUB_IMG_3159_110936.jpg

배송안내

- 배송비 : 기본배송료는 2,500원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)  50,000원 이상 구매시 무료배송입니다.

- 본 상품의 평균 배송일은 0일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]

- 본 상품의 배송 가능일은 0일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)

교환 및 반품안내

- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.

- 저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)

- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.

- 신발의 경우, 실외에서 착화하였거나 사용흔적이 있는 경우에는 교환/반품 기간내라도 교환 및 반품이 불가능 합니다.

- 수제화 중 개별 주문제작상품(굽높이,발볼,사이즈 변경)의 경우에는 제작완료, 인수 후에는 교환/반품기간내라도 교환 및 반품이 불가능 합니다. 

- 수입,명품 제품의 경우, 제품 및 본 상품의 박스 훼손, 분실 등으로 인한 상품 가치 훼손 시 교환 및 반품이 불가능 하오니, 양해 바랍니다.

- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오. 

환불안내

- 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.

AS안내

- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.

- A/S는 판매자에게 문의하시기 바랍니다.

이미지 확대보기[80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트

[80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
  • [80950] 2024 어소시 RC8B4.1e 신형 1:8 전동버기 키트
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동